Install The EchoNET
Version 1.0 for the M-VAVE FM-1, installed over USB from this page.
Before you start
- Use Chrome or Edge on a computer (Windows, macOS, Linux or ChromeOS). Safari and Firefox can't do this.
- Connect the FM-1 directly to the computer with a USB data cable (not a charge-only one, no hub if you can help it), and switch it on.
- Close other music apps that use MIDI (DAWs, editors), so the browser can reach the FM-1.
When you press Install, the browser asks to use MIDI devices: allow it. Nothing is sent anywhere else; the firmware is checked and written from this page.
Loading…
It takes about two minutes. The FM-1 restarts by itself when it's finished. Don't unplug it or close this page while it's writing. If it stops, replug the USB cable and press Install again: it carries on where it left off.
Please read. The EchoNET is custom firmware made by an individual, free of charge and with no warranty. Installing it replaces the FM-1's own firmware. It has been tested on the author's FM-1, but nobody can promise it works on yours: you install it at your own risk, and the author accepts no responsibility for damage or problems. If an install ever fails so badly that the FM-1 won't start, recovering it needs a Transporter.
Go back to the official M-VAVE firmware
Download the official FM-1 firmware (V15 or V16) from M-VAVE and choose its unchanged FM-1.fwsc file below. It is checked in this browser against the known official files and never uploaded. Your EchoNET scenes and settings are not kept.
The EchoNET by Darren Lock, built on Felucca by Leo Kuroshita, Hügelton Instruments. This installer is Felucca's own, adapted. Free software under the GNU GPL version 3, with no warranty: complete source, licences. The firmware package also holds three JieLi AC79 SDK files (JieLi Technology, Apache-2.0).
M-VAVE and FM-1 are trademarks of their respective owners. "Felucca" and "Hügelton Instruments" are names of Hügelton Instruments. The EchoNET is not affiliated with, endorsed by or supported by either.